Load the factory bin if you need to reset your device clean. Make sure to “factory reset” once loaded.
After which, load the latest private server bin. Once again, factory reset the device once loaded.
If you’re asked for a password during the bin loading process, its 0000
Configure your receiver for private server:
load the newest factory file
load the newest bin file and do a factory default
Setup sats and scan
menu>system configuration>cccamd&newcamd—turn on
menu>network setup>serversettings
server1 newcamd>ok
type–newcamd
domain–servername provided
port–port number provided
user name–14 digit code provided
password–14 digit code provided(same as user name)
deskey–28 digit number provided
hit blue key on remote to apply
exit and put on a known working channel and wait for tv to appear
The Dreambox is one of the smallest FTA receivers ever made yet one of the most powerful receiver. The original Twain model has been discontinued but due to popular demand the China version is now available.
Check version information to make sure that you have the 2.09 sky file.
If your receiver version is lower than 2.09, update using usb thumb drive & files above.
Update your receiver by unzipping the factory file & private server file.
Use the USB thumb drive, copy the factory file on, and flash using on screen menu
Perform a factory reset
Use the USB thumb drive, copy the private file on, and flash using on screen menu
Perform a factory reset
Now scan your sats
Configuring for private server:
1.From the menu, proceed as follows:
- Installation > Network > IP setup
- Set the unit on “Auto” then click “Apply”
- All your settings should be filled in instantly.
2. Proceed to Net Application
- Set Softcam to Dream & Newcamd
- Set to Private Server #1
- Zero out any other private servers
3. Fill in private server information
- Enter Host Name (select, and press OK)
- Enter Port
- Enter Deskey
- Hit Authorization
- Enter ID (username)
- Enter Password
Another thing if you need to change letters to capital or lower case letters when putting the info in To do so simply hit the red button on the remote to toggle on or off the Caps.
4. Exit Net Application and head to ”Channel Search” to setup sats.
- If you already have your sats scanned, then skip this.
5. Change to channel 101, and make sure you have picture
