Captiveworks 600/700/800 Receiver Setup

This document can be used with:

  1. UH-100 CW USB to RJ45 dongle.
  2. X-FTA / Gargoyle Router

First get these files:

  1. For Captiveworks 800 | Factory Bin | Private Server Bin | Sofware Loader
  2. For Captiveworks 700 | Factory Bin | Private Server Bin | Sofware Loader
  3. For Captiveworks 600 | Factory Bin | Private Server Bin | Software Loader

Preparing your receiver for private server:

  1. First perform a factory default to clean receiver out then load the factory bin.
  2. Do a hard reboot after that (switch off from back and on again).
  3. You then need to load the private server bin for what model you have.

 

Here are the complete steps with pics.

  1. Make sure to reboot the receiver after switching off from back after loading the bin.
  2. Plug your dongle in the usb. Connect an ethernet cable to the dongle to connect it to the internet.
  3. Now set up your satellites and scan them. Make sure you get a good signal.
  4.  Turn off autoroll: MENU > SYSTEM SETTINGS > OSD > AUTOROLL OFF (if you are not able to do this now, do this in step 9
  5.  Enable Card Share: PRESS f1 ON YOUR REMOTE AND THEN 555
  6. Note: If you enter 555 and the unit DISABLES Card Share then hit f1 again and then 555 to ENABLE it (if you are not able to do this now, do this in step 9
  7. Enable Patch: PRESS f1 ON YOUR REMOTE AND THEN 000
  8. Note: If you enter 000 and the unit DISABLES the Patch then hit f1 again and then 000 to ENABLE it (if you are not able to do this now, do this in step 9).

Follow this document if you’re using an X-FTA Router:

X-FTA / Gargoyle Setup

Follow this document if you’re using the UH-100 CW USB to RJ45 dongle:

Captiveworks UH-100 Dongle

Posted in Documents, Receiver Setup
3 comments on “Captiveworks 600/700/800 Receiver Setup
  1. Luis Astudillo says:

    cannot dowload all the files ??

    pleace help

  2. felix alvarez says:

    i need help setting up my captive works 700. for some reason my dongle looks off and the f1 then 555 and f1 000 camant keys dont work. the info and 1 comant dont open tyhe screen for me to iinputmy code.

  3. jose alvarado says:

    MY CAPTIVEWORKS DON’T GET ANY SINGNAL NO CHANNELS

3 Pings/Trackbacks for "Captiveworks 600/700/800 Receiver Setup"
  1. [...] to RJ45 dongle. X-FTA / Gargoyle Router First get these files: For Captiveworks 800 | Factory Bin |Captiveworks 600/700/800 Receiver Setup | ikxs.bz This entry was posted in Deals by admin. Bookmark the [...]

  2. [...] to RJ45 dongle. X-FTA / Gargoyle Router First get these files: For Captiveworks 800 | Factory Bin |Captiveworks 600/700/800 Receiver Setup | ikxs.bz .pane"); $("ul.tabs2").tabs("> .pane2"); //$(".pane").hide(); [...]

  3. [...] to RJ45 dongle. X-FTA / Gargoyle Router First get these files: For Captiveworks 800 | Factory Bin |Captiveworks 600/700/800 Receiver Setup | ikxs.bz This entry was posted in Interest by admin. Bookmark the permalink. See the Private Server [...]

Leave a Reply